libsndfile: audio with scipy -> Python audio tools.

Download the source

./configure
make
sudo make install

Then attempt to install `audiolab'. Spend some time, dicking about, trying
to understand how a version system, `trac' could be so prolific, when instructions
for using it to bloody well download the files it tracks, cannot be found.

Give up, and download each bloody file, one by one, manually creating
directories.

Get annoyed and find a different package: python audio tools

untar groups of files with xargs

ls *.rar | xargs -i unrar x {}

WoW and Guildwars on wine

This worked!

http://www.fsckin.com/2007/12/20/how-to-run-world-of-warcraft-wow-in-linux-using-wine/comment-page-3/

More detail:

glxinfo | grep rendering

should show direct rendering as yes.

Install wine, then some fonts:

sudo apt-get install wine msttcorefonts ttf-xfree86-nonfree

winecfg

Audio tab: try ALSA Driver

Copy the game over.

Update WTF/Config.wtf to the example below.

Run regedit. Add the key,

My computer/HKEY_CURRENT_USER/Software/Wine/OpenGL

and add the key: value

DisabledExtensions = GL_ARB_vertex_buffer_object

That should do it. Old data follows

-------------------------



Now, however, the sound is choppy. I changed to hardware sound; this helped the choppy video.
Today, the sound is off (after running gw and wow and pan on separate desktops).

So, according to http://ubuntuforums.org/showthread.php?t=964580 changing the buffer helps.
vi ~/.wine/drive_c/Program\ Files/World\ of\ Warcraft/WTF/Config.wtf

SoundBufferSize was "150"

Set to 50: No good. Restore to 150

Try using OSS audio instead of ALSA:

padsp winecfg and change from OSS to ALSA under the audio tab,

Run wow via:
padsp wine Wow.exe

I ran without the padsp command: Changing to ALSA fixed the audio. :)

-------------------------

A month later and WoW won't update. It claims there's a patch that needs downloading, but it can't do it. Piece of shit! Notes all over the web with moaning kids proposing silly fixes involving timed right clicks and permissions.

Anyway, long story short. Copy a working version over, from a different machine. It worked.

The WTF/Config.wtf file read as follows:

SET readTOS "1"
SET readEULA "1"
SET readTerminationWithoutNotice "1"
SET readScanning "-1"
SET readContest "-1"
SET locale "enGB"
SET expansionMovie "0"
SET movie "0"
SET showToolsUI "1"
SET portal "eu"
SET realmList "eu.logon.worldofwarcraft.com"
SET coresDetected "2"
SET timingTestError "0"
SET hwDetect "0"
SET gxRefresh "56"
SET gxMultisampleQuality "0.000000"
SET videoOptionsVersion "3"
SET Sound_OutputDriverName "System Default"
SET farclip "1277"
SET specular "1"
SET groundEffectDensity "64"
SET installType "Retail"
SET patchlist "eu.version.worldofwarcraft.com"
SET mouseSpeed "1"
SET Gamma "1.000000"
SET accounttype "CL"
SET Sound_MusicVolume "0.60000002384186"
SET Sound_AmbienceVolume "0.40000000596046"
SET projectedTextures "1"
SET realmName "Trollbane"
SET gameTip "87"
SET gxResolution "1440x900"
SET VoiceActivationSensitivity "0.39999997615814"
SET ChatMusicVolume "0.29999998211861"
SET ChatSoundVolume "0.39999997615814"
SET ChatAmbienceVolume "0.29999998211861"
SET textureFilteringMode "5"
SET componentTextureLevel "9"
SET shadowLevel "0"
SET groundEffectDist "140"
SET environmentDetail "1.5"
SET weatherDensity "3"
SET gxApi "opengl"
SET ffxGlow "0"
SET SoundOutputSystem "1"
SET SoundBufferSize "150"
SET Sound_EnableHardware "1"
SET Sound_SFXVolume "0.30000001192093"
SET gxVSync "0"
SET Sound_OutputQuality "0"
SET Sound_MasterVolume "0.60000002384186"
SET gxWindow "1"
SET Sound_NumChannels "64"
SET Sound_ZoneMusicNoDelay "1"
SET Sound_EnableSoundWhenGameIsInBG "1"
SET accountName "yeahright@etc.com"

The end of xp? mplayer audio track selection.

This evening, I double clicked an audio file in explorer, to play it. It's long filename resulted in the file extension running off the screen edge: I scanned the filename and icon and concluded it was a .mp3.

It wasn't. It was a compressed executable which promptly ran and infested my machine, turning off the firewall; slowing the machine to a halt; triggering multiple warnings (credit to Microsoft for one of their patches managing that, at least) and eventually (10 seconds or so) blue screening.

On reset, wallpaper change and lots of warnings.

Fuck it. Back to linux. Grab all the data off the drive and reinstall.

No. This was XP on sda5 or so. Do I trust the windows installer not to interfere with the other (perfectly operational) linux partitions? In short, no.

So, good bye XP. You had your chance, but if double clicking a single file is enough to hose my system, I'd be acting irresponsibly if I were to use it. It was only for games anyway.

So, now, World of Warcraft on Linux. First, mplayer audio track selection.

mplayer -vo null -ao null -frames 0 -v filename | grep audio

shows the audio tracks available. To run `2' (if it's there):

mplayer -aid 2 filename

For example:

mplayer -vo null -ao null -frames 0 -v VTS_02_1.VOB | grep audio

shows

==> Found audio stream: 128
==> Found audio stream: 129
==> Found audio stream: 130
==> Found audio stream: 131
==> Found audio stream: 132

So, try

mplayer -aid 129 VTS_02_1.VOB

or even add some lf cut EQ:

mplayer -aid 129 -af equalizer=-12:-6:0:0:0:0:0:0:0 VTS_02_1.VOB

http://www.linuxjournal.com/article/9787

is interesting.

Dont forget full screen!

mplayer -aid 129 -af equalizer=-12:-6:0:0:0:0:0:0:0 -fs VTS_02_1.VOB

and finally, deinterlace:

mplayer -aid 129 -af equalizer=-12:-6:0:0:0:0:0:0:0 -fs -vf lavcdeint VTS_02_1.VOB

The obvious thing to do is to substitute a command, say `play',
to execute all that spuff, followed by the filename.

Set up the mplayer defaults!

http://liquidweather.net/howto/index.php?id=98

shows ~/.mplayer/config

if created, contains the defaults. Great! Send all mplayer screen output to
the file ~/.mplayer/output and refer to it from conky!

---------------------------------------

ALSA stuff.

Avoid OSS, as it seems the hardware gets locked during use.

aplay -l

to list the playback devices connected. There will be card numbers,
devices and subdevices.

mplayer addresses them as,

mplayer *.mp3 -ao alsa:device=hw=0.1

where this addresses card zero, device 1. At least, I think so.

Python list comprehension with logic

test= [i if i in [1,2] else 0 for i in xrange(5)]

test= [i if i in [1,2] else 2*i if i in [3,4] else 0 for i in xrange(5)]

ie, the trailing `else' is essential.

Xlib: extension "Generic Event Extension" missing on display "localhost:10.0"

This occurred with a fresh installation of ubuntu 9.10 (karmic). The machine had an ATI graphics card. The error listed below occurred with

ssh -x ipaddress

and then running gmsh on the remote machine. Firefox worked ok, forwarding graphics as hoped.

The fix was to install the restricted drivers for the card, an operation achieved from gnome on prompting that there were restricted drivers available.

Error follows:


Xlib: extension "Generic Event Extension" missing on display "localhost:10.0".
Insufficient GL support
[englinux02:12698] *** Process received signal ***
[englinux02:12698] Signal: Segmentation fault (11)
[englinux02:12698] Signal code: Address not mapped (1)
[englinux02:12698] Failing at address: 0x18
[englinux02:12698] [ 0] /lib/libc.so.6 [0x7fec9f45a530]
[englinux02:12698] [ 1] /usr/lib/libfltk_gl.so.1.1(_ZN12Fl_Gl_Window12make_currentEv+0x59) [0x7feca7e35cc9]
[englinux02:12698] [ 2] gmsh [0x480ba1]
[englinux02:12698] [ 3] gmsh [0x41b497]
[englinux02:12698] [ 4] /lib/libc.so.6(__libc_start_main+0xfd) [0x7fec9f445abd]
[englinux02:12698] [ 5] gmsh [0x41afe9]
[englinux02:12698] *** End of error message ***
Segmentation fault

vlad

v g o n t c h a r o v @ru wave .c o w.you kay

binaural frog recording!

http://www.virtualbarber.org/page.php?21

Latex for each loops.

Credit to Gavin for this one.

To create a for loop, iterating over a list:

\def\freqlist{17000,17100,17200,17300}

\foreach \freq in \freqlist
{
%\input{chapters/\TeXName}
\freq
}

This was used to select filenames for multiple image imports; the images
were generated externally and were named according to the frequency.

In-line text replacement / ascii filter

The file conky is displaying from mplayer, contains non-ascii characters.

Filter its display.

http://www.devdaily.com/unix/edu/un010011/

shows the `tr' command helps:

tr -cd '\11\12\40-\176' < $INPUT_FILE > $OUTPUT_FILE

Those are octal numbers?! Unusual.